Are you purchasing online HAZWOPER training just for you or one of your employees? Then you’re where you need to be. Easily complete required HAZWOPER training, meet compliance needs, and earn your HAZWOPER completion certificate with Summit’s interactive and media-rich online training for individuals.
Summit’s HAZWOPER training teaches employees best safety practices involved with hazardous materials operations, such as emergency response, clean-up, transportation, disposal, storage, and treatment.
This course is designed for general site workers who remove hazardous waste or who are exposed or potentially exposed to hazardous substances or health hazards.
The course is comprised of nine sections covering topics pertaining to workplace hazards associated with Hazardous Waste Operations and Emergency Response (HAZWOPER). Topics include HAZWOPER regulations, Site Characterization, Toxicology, Hazard Recognition, Personal Protective Equipment, Decontamination, Medical Surveillance, Confined Space Entry, and Emergency Procedures. Upon successful completion of the course you will receive a certificate of completion which is accepted by OSHA as documentation of training.
This course is specifically designed for workers onsite only occasionally for a specific limited task and who are unlikely to be exposed over permissible exposure limits and published limits; or for Workers regularly onsite who work in areas which have been monitored and fully characterized indicating that exposures are under permissible exposure limits and published exposure limits, where respirators are not necessary, there are no health hazards, or the possibility of an emergency developing.
This course is comprised of 14 sections, covering topics pertaining to workplace hazards associated with Hazardous Waste Operations and Emergency Response (HAZWOPER). Upon successful completion of the course, you will receive a certificate of completion which is accepted by OSHA as documentation of training.
Note: Workers must have 24 hours of initial training and one day of supervised field experience before they are allowed to enter the site. **The online course meets the standard requirement of 24 hours of initial training. The one day field experience under a trained, experienced supervisor is the responsibility of the student's employer or potential employer.
This course is specifically designed for workers who are involved in:
Topics include protection against hazardous chemicals, elimination of hazardous chemicals, safety of workers and the environment, and OSHA regulations. This course covers topics included in 29 CFR 1910.120.
Note: Trainees must have additional hands-on training in the donning, doffing, and use of the Personal Protective Equipment required for their jobsite(s) in accordance with 29 CFR 1910.120. Workers must also have 40 hours of initial training before they may enter the site and at least three days of actual field experience under a trained, seasoned supervisor. The three days field experience under a trained, experienced supervisor is the responsibility of the student's employer or potential employer.
Fill out the form below and a representative will reach out to you soon to give you a demo